ROBOTS
VERTIDRIVE M7
60m² / 646 ft² per hour
7x more efficient
8x faster than manual work
86% cost reduction

Vertidrive M7
Compact, agile and powerful multi-tasker
Extremely compact and agile with extra magnetic force for real heavy-duty hydroblasting operations.
The VertiDrive M7 Robot was especially designed to traverse the more challenging and curved irregular steel surfaces in any direction.
It is an extremely agile robotic solution because of its short and compact wheelbase. The extra magnets make the robot extremely strong, so it is able to pass over a curve without losing its grip.
The VertiDrive M7 is an all-rounder, just like the M3 robot. It comes with three standard interchangeable applications, which allows you to change from dry blasting to washing without wasting any time.
Other than the M3, the M7 also allows the operator to not only move the nozzles left and right but also up and down. This way it can conquer obstacles on the surface without a problem.
WORKS ON STEEL IN ALL DIRECTIONS
TURNS WORK INTO A ONE-MAN OPERATED JOB
SAFE, CLEAN AND EFFICIENT OPERATION
USER FRIENDLY AND EASY TO OPERATE

swing arm - 4 directions
1500 mm (60”) swing: left, right, up and down, conquering every obstacle.

Compact Agile design
Smaller footprint for smaller radius with an incredible high production rate.

ELECTRIC VERSION
Only available with an electric control system.

STRONGER MAGNETS
More magnetic power for the more challenging surfaces.
Interchangeable applications
From washing to blasting and much more…
Standard applications available for M7
- High pressure washing
- Hydro blasting
- Abrasive blasting
Customized applications
It is easy to add your own customized applications (eg.).
We have partners available to help developing the applications for your needs.

Washing
Max. 500 bar @ 90 l/min
For the removal of dirt, debris and rust

Hydro blasting
Max. 3000 bar @ 40l/min
For the removal of paint

Abrasive blasting
Works with all kinds of abrasives
For the removal of coatings
Safer
- Wireless control, so no need for the operator to come near the nozzle
- Eliminates access requirements (scaffolding, cherrypickers)
- Safe and easy accessibility to all horizontal, overhead and vertical surfaces
Efficient
- Turns the work into a one-man operation
- 7 times more efficient than manual work
User Friendly
- Easily switch from one application to another in just a few minutes
- Fits through manhole
- Remote controlled operating system
Quality
- Full service package
- Consistent and high quality
More productive
- Eight times faster than manual work
- Reduced operator fatigue so robots can run without any problem 24 hours a day
Cost effective
- 86% cost reduction
- less working hours
- less people needed
Environmental impact
- Less water needed for doing the job is compared to manual operations
Technical specifications
Vertidrive M7
General
Cleaning width: 1500 mm (60″)
Dimensions: 650 x 550 x 520 mm (25.60″ x 21.65″ x 20.45″)
Total Weight: 55 kg / 120 lbs
Control System
- Electric version
Applications
- High pressure washing
- Hydro blasting
- Abrasive blasting
InFORMATION
GET IN TOUCH
Technical specifications
Vertidrive M7
General
Cleaning width: 1500 mm (60″)
Dimensions: 650 x 550 x 520 mm (25.60″ x 21.65″ x 20.45″)
Total Weight: 55 kg / 120 lbs
Control System
- Electric
Applications
- High pressure washing
- Hydro blasting
- Abrasive blasting
InFORMATION
GET IN TOUCH
VIDEOS
Vertidrive M7 in action
Hydroblasting
M7 with self-rotating nozzle-bar
WET ABRASIVE BLASTING
M7 with abrasive wet (slurry) blasting application
GRIT BLASTING
M7 with abrasive (grit) blasting application
Vertidrive M7
Accessoires

Transport frame
For transport and storage of the robot and used as counterweight for the robot’s safety court.

Spare Part Kit & UHP Spares
Helpful kit to fix problems on-site promptly and accurately.