News
Trending
Products
Company
Innovations
Events
Partners
market
News
Products
Waterjetting vs. Abrasive Blasting
What is surface preparation? Surface preparation is done to increase adhesion to coatings. Without good quality surface preparation, meaning ultra-clean and a proper profile, all coating systems will fail. It can be done mechanically or chemically, with different...
VertiDrive TECHTalk – February 2021
Download the VertiDrive TECHTalk February 2021
New M8 Cargo Hold Cleaning Solution
OUR NEW STATE OF THE ART CARGO HOLD CLEANING SOLUTIONVertiDrive, in close cooperation with partners from the field, has worked relentlessly over the past years towards a new solution called the VertiDrive M8 Cargo Hold Cleaner. The robot is packed with the latest...
News
Company
Introduction Damian van Dam
Who am I? My name is Damian van Dam and part of the VertiDrive team since December 2020 as an Inside Sales Representative. I am 32 years old, born and raised in the beautiful city of Rotterdam but currently living in...
Working in an ‘igloo’ printed from PET waste
R-Iglo The first 3D-printed workspace has been put into use in the Grofsmederij @ VertiDrive on the RDM site in Rotterdam. The workspace was printed in De Werkplaats at M4H using PET waste from industry based in the port. And it's called the R-Iglo.
VertiDrive is now ISO 9001:2015 certified!
ISO 9001:2015 VertiDrive has successfully met ISO 9001:2015 requirements for Quality Management System for sales, development, purchase, production, and services provision of robotic crawler systems. Obtaining ISO 9001:2015 is another proof that quality has always...
News
Market
No articles available in this category yet.
News
Innovations
Innovation starts with a feasibility study!
Custom design for you VertiDrive’s product portfolio already meets a vast array of customer needs for surface treatment in various segments like maritime, tank storage, offshore, and other industrial environments. Our crawlers handle applications like HP cleaning, UHP...
Optimize your Waterjet performance
INTRODUCING – VertiDrive’s tetraCORE™ WATERJET NOZZLE configuration package Do you use your equipment at its maximum performance? Do you know all the variables that make or break your production rates – and how nozzle configuration impacts your production? The answer...
VertiDrive is working on a new subsea cleaning solution!
One of the biggest efficiency threatening mechanisms in marine transportation is the resulting effect of (bio-)fouling growth on hull surfaces. There is a dramatic effect on drag, fuel consumption, cost and CO2 emissions as a direct result. From the many fouling...
News
Partners
VertiDrive and JCLEAN join forces
VertiDrive and JCLEAN join forces in China and start an extensive collaboration. Recently JCLEAN and VertiDrive entered into a collaboration to introduce the VertiDrive magnetic solution for surface treatment. The collaboration leads to an enormous advantage for the...
News
Events
Waterjetting vs. Abrasive Blasting
What is surface preparation? Surface preparation is done to increase adhesion to coatings. Without good quality surface preparation, meaning ultra-clean and a proper profile, all coating systems will fail. It can be done mechanically or chemically, with different...
Innovation starts with a feasibility study!
Custom design for you VertiDrive’s product portfolio already meets a vast array of customer needs for surface treatment in various segments like maritime, tank storage, offshore, and other industrial environments. Our crawlers handle applications like HP cleaning, UHP...
Introduction Damian van Dam
Who am I? My name is Damian van Dam and part of the VertiDrive team since December 2020 as an Inside Sales Representative. I am 32 years old, born and raised in the beautiful city of Rotterdam but currently living in...
VertiDrive and JCLEAN join forces
VertiDrive and JCLEAN join forces in China and start an extensive collaboration. Recently JCLEAN and VertiDrive entered into a collaboration to introduce the VertiDrive magnetic solution for surface treatment. The collaboration leads to an enormous advantage for the...
Working in an ‘igloo’ printed from PET waste
R-Iglo The first 3D-printed workspace has been put into use in the Grofsmederij @ VertiDrive on the RDM site in Rotterdam. The workspace was printed in De Werkplaats at M4H using PET waste from industry based in the port. And it's called the R-Iglo.
VertiDrive TECHTalk – February 2021
Download the VertiDrive TECHTalk February 2021
No articles available in this category yet.